aging test chambers-Environmental test chamber manufacturers|climate test chamber suppliers-Dexiang instrument

programmable temperature humidity test chamber

IMAGE PLACEHOLDER — Replace with real DX-H201 front, open-door, workspace and TEMI880 controller photographs PROGRAMMABLE CLIMATIC RELIABILITY TESTING Select the chamber from the loaded specimen and profile—not litres alone. The Dexiang DX-H201 programmable temperature humidity test chamber combines five reach-in workspace sizes with a standard -40°C to +150°C range and 20% to 98% RH control. It is intended for steady-state damp heat, high/low temperature exposure and programmable climatic cycling of components, materials and assemblies. 01 Method and profile Provide the standard edition, temperature-humidity points, ramps, dwell times, cycles and acceptance criteria. 02 Loaded envelope State specimen dimensions, quantity, mass, orientation, fixture and clearance around airflow paths. 03 Powered heat load Provide peak and steady heat dissipation, duty cycle, wiring and…

benchtop temperature humidity test chamber

IMAGE PLACEHOLDER — Replace with real DX-H201-Mini tabletop installation, open-workspace and controller photographs TRUE BENCHTOP CLIMATIC TESTING Bring programmable temperature and humidity testing to the laboratory bench. The Dexiang DX-H201-Mini is a 31.5 L benchtop temperature humidity test chamber for small components, sensors, PCB assemblies and material specimens. It combines -40°C to +150°C temperature exposure, 20% to 98% RH humidity control and continuous +85°C / 85% RH operation in a 1150 × 600 × 700 mm tabletop cabinet powered by AC 220 V single phase. 01 Test profile Send the method, setpoints, dwell time, ramps, cycles and acceptance criteria so the required operating points can be checked. 02 Specimen fit Confirm dimensions, quantity, mass, orientation and airflow clearance inside the…

PCT test chamber

IMAGE PLACEHOLDER — Replace with real DX-PCT350 / DX-PCT450 product and open-door photos SATURATED STEAM PRESSURE AGING Select a PCT test chamber from the prescribed method and loaded specimen—not temperature alone. Dexiang DX-PCT350 and DX-PCT450 pressure cooker test chambers generate a saturated-steam environment at elevated temperature and pressure for accelerated moisture-resistance evaluation. Start with the exact PCT method, load envelope, exposure condition and post-test inspection plan before selecting a model. 01 Method and cycle Send the standard or customer procedure, revision, temperature, duration and permitted ramp or exhaust sequence. 02 Loaded specimens Provide dimensions, mass, quantity, orientation, packaging and fixture drawing. 03 Steam access Define spacing and loading so steam can reach the intended surfaces without blocking drainage. 04 Acceptance…

HAST test chamber

IMAGE PLACEHOLDER — Replace with real DX-HAST350 / DX-HAST450 product and open-door photos UNSATURATED PRESSURE AGING Select a HAST test chamber from the method, specimens and bias—not pressure alone. Dexiang DX-HAST350 and DX-HAST450 chambers combine +100 to +143°C, 65% to 100% RH and controlled pressurized moisture to accelerate reliability evaluation of semiconductor packages and electronic components. Before quotation, match the chamber to the exact HAST condition, specimen envelope, loading quantity and electrical-bias plan. 01 Method and condition Send the standard or customer procedure, temperature, RH, duration and pressure basis. 02 Specimen envelope Provide dimensions, quantity, orientation, fixture and clearance around the cylindrical workspace. 03 Bias requirement Define voltage, current, pins, insulation, channel grouping and failure monitoring. 04 Acceptance evidence State…

Air-Cooled Xenon Arc Weathering Test Chamber

Air-cooled xenon exposure · Model DX-H301-1 Full-spectrum weathering with a simpler lamp-cooling installation The DX-H301-1 uses an air-cooled xenon arc source to expose materials to controlled radiation, chamber temperature, black-panel or black-standard temperature, humidity and spray. A built-in fan removes lamp heat without an external cooling tower or lamp-cooling water pipework. This does not mean the chamber is water-free: an external pure-water or distilled-water supply is required when the spray function is used. Send your method for review Decision summary Choose DX-H301-1 when the test and installation match Good fit A 270 L chamber and 2,200 cm² effective exposure area fit the specimens. You want to avoid an external lamp-cooling tower. Your method can use one selected irradiance control band…

Tower Type UV Aging Test Chamber

0.35–1.20W/m²/nm @ 340 nm 0.30–1.15W/m²/nm @ 313 nm 0.38 m²Total effective exposure area 50 ± 3 mmLamp axis to specimen plane CSV exportConfigurable data interval Why the tower architecture matters A fixed exposure geometry built for repeatable flat-specimen testing. The chamber positions removable specimen frames on two inclined exposure sides. The mounting angle is fixed by the tower structure, while the target specimen plane is maintained 50 ± 3 mm from the lamp center axis. Choose this architecture when the laboratory primarily tests standardized flat panels and needs high specimen throughput in a compact footprint. Large finished products and irregular three-dimensional parts require a fixture and exposure-geometry review before quotation. Two exposure sidesFour lamps and two irradiance sensors are arranged…

Box-Type UV Accelerated Weathering Test Chamber

8 × 40 WDomestic UVA-340 lamps standard 0.35–1.20W/m²/nm at 340 or 313 nm ±5%Specified irradiance uniformity 1170 × 450 × 500W × D × H working zone, mm 12 nozzlesTop-down programmable spray Why the box architecture matters Use a horizontal specimen plane when the sample cannot be mounted like a standard flat panel. The DX-H302-2 places finished parts, thick specimens and irregular shapes directly on an adjustable perforated shelf. Eight lamps are mounted in one row above the working zone, while four movable irradiance sensors follow the selected specimen-plane height. Direct horizontal loading Place specimens on the shelf without cutting every sample into a standard panel size. Adjustable exposure height Fixed shelf slots allow the test surface to be positioned…

Key Technical Parameters for Choosing a Xenon Aging Test Chamber

At Dexiang, as a professional environmental test chamber manufacturer, we’ve seen labs waste years on data that couldn’t be repeated because the wrong chamber was chosen. This article is designed to help you avoid that mistake and give you a clear, engineer-level checklist for selecting the right xenon arc weathering test chamber for 2026 and beyond. If you’re looking at buying a xenon aging test chamber, you’ve probably noticed something: every supplier claims their system offers “stable irradiance,” “accurate temperature,” and “standard-compliant” performance. But which technical parameters actually matter for your materials, standards, and budget? In this guide, you’ll see exactly which specs you must evaluate before you sign a PO: from xenon lamp type and power, to irradiance range and control accuracy, to filter systems, black panel temperature,…

How Many Types of Stability Chambers Are There Explained with Features

What Are Stability Chambers and Why Do They Matter Stability chambers are controlled environment units designed to test how products respond to varying temperature, humidity, and other conditions over time. These chambers are essential tools for pharmaceutical, food, cosmetic, and electronic industries to ensure product quality and shelf life. Role in ICH and FDA Compliance Stability chambers help you meet critical regulatory standards including ICH (International Council for Harmonisation) guidelines and FDA requirements. Using these chambers, you can perform stability testing to prove that your products remain safe and effective throughout their intended shelf life. Benefits of Stability Testing Common Parameters Controlled In Stability Chambers Parameter Typical Range Purpose Temperature 5°C to 60°C Simulates storage and transit environments Relative Humidity…

programmable temperature humidity test chamber

benchtop temperature humidity test chamber

PCT test chamber

HAST test chamber

Air-Cooled Xenon Arc Weathering Test Chamber

Tower Type UV Aging Test Chamber

Box-Type UV Accelerated Weathering Test Chamber

Key Technical Parameters for Choosing a Xenon Aging Test Chamber

How Many Types of Stability Chambers Are There Explained with Features

Company News

HAST test chamber

Large Temperature & humidity test room

Air-Cooled Xenon Arc Weathering Test Chamber

Tower Type UV Aging Test Chamber

benchtop temperature humidity test chamber

Engineering Resources

benchtop temperature humidity test chamber

PCT test chamber

HAST test chamber

Air-Cooled Xenon Arc Weathering Test Chamber

Contact Us